Stoptails bridges are back in stock !
MannMade USA #2300 Intonatable Stoptail bridges are back in stock and better than ever. I am proud to say that this last batch is better than ever… I have tweaked the design here and there and am super happy with the results. I hope you are too!
Timothy EvansMay 18, 2018 at 9:09 AM
Hello John,
I have an all mahogany Standard 22: 1994 – 22-fret stoptail that I’d like to upgrade to one of your adjustable bridges and want to get the correct bridge and studs/bushings if needed/recommended by you, just want to make sure I get the order right. Also, I’ve read that some of your later bridges are loose on the studs, would like to avoid this if possible.
John MannMay 21, 2018 at 9:51 AMAuthor
You need to order #2300, with slotted saddles. http://store.guitarvaultusa.com/MannMade_USA_Intonatable_Stoptail_Bridge_Assembly_p/2300.htm
My stud threads are machined to a Class 3 thread, which is what the military and aerospace industries use – https://www.natool.com/sites/default/files/public/documents/classes_of_fit_web_catp101-102.pdf
Unfortunately many manufacturers who supply the bulk of the guitar industry only produce parts to Class 2 threads, which is much sloppier and looser fit.
The end result of how my studs fit, is basically determined by the accuracy of the stud well. If you find my studs fit too loose in your existing stud wells, the only solution is to purchase and install a set of MannMade USA stud wells, which will be much tighter in fit.
MannMade USA Stud Wells #2307 – http://store.guitarvaultusa.com/Stoptail_Well_set_p/2307.htm
Kris JohnsonOctober 4, 2018 at 1:05 PM
Are you planning on ever offering a gold plated version of this bridge. I have 2 gold hardware stop-tail guitars that I’d like to switch to fully adjustable bridges for hybrid string gauges that I like to use, but I don’t really feel like the aluminum will look all that good next to everything else in gold.
John MannDecember 13, 2018 at 7:54 PMAuthor
Kris,
Yes I do. Look for it in 1Q 2019
AndyJune 3, 2019 at 4:51 PM
I was looking for an exceptional quality wrap around bridge for a guitar that has 82mm stud spacing. From what I can tell, your PRS version is 82.55mm. I guess I could dowel the old studs and re-drill them.
John MannJuly 23, 2019 at 7:22 PMAuthor
Andy, The only 2 post spacings available in the industry are Gibson spaced 3.250″ (82.55mm) or PRS spaced 3.200 (81.28mm)
Edward LawrenceAugust 9, 2020 at 10:33 AM
I was hoping to get one of your stoptails in black can you cater to my needs.
John MannDecember 22, 2021 at 8:54 AMAuthor
Yes we can! Please contact directly at John Mann’s Guitar Vault